# Is elevation possible at point x?

**URL:** <https://forum.vfrnav.com/t/elevation-am-punkt-x-moglich/298>\
**Category:** VFRnav Support\
**Created:** [April 29, 2026, 8:18am UTC](https://forum.vfrnav.com/t/elevation-am-punkt-x-moglich/298 "2026-04-29T08:18:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![skyandheaven](https://forum.vfrnav.com/user_avatar/forum.vfrnav.com/skyandheaven/32/682_2.png) [@skyandheaven](https://forum.vfrnav.com/u/skyandheaven)\
**Post date:** [April 29, 2026, 8:18am UTC](https://forum.vfrnav.com/t/elevation-am-punkt-x-moglich/298/1 "2026-04-29T08:18:02Z")

</div>

Hello,

thanks for the great support and the forum, and for all the effort in picking up ideas and suggestions here!

I have one suggestion that might be easy to implement: When I double-click/touch a point x on the map, the airspaces and the coordinates (waypoint) are shown in the box below. Would it be possible to also display the elevation at that point in ft? I would find this useful for route planning, because the MEF isn’t always meaningful, especially at the edge of mountain ranges.

Thanks, regards!

Ansgar

---

<div class="post-metadata">

**Author:** ![H655](https://forum.vfrnav.com/user_avatar/forum.vfrnav.com/h655/32/350_2.png) [@H655](https://forum.vfrnav.com/u/H655)\
**Post date:** [April 29, 2026, 8:58am UTC](https://forum.vfrnav.com/t/elevation-am-punkt-x-moglich/298/2 "2026-04-29T08:58:22Z")

</div>

Hello Ansgar,

thank you for your feedback.

The display you mentioned, including the elevation, is already planned and is already on the to-do list 👍

In general, the info sheet will be revised to appear after double-clicking a map point so that information about that point can be retrieved faster and more easily in the future. The elevation will also be shown then — it currently only appears for airfields.

Clear skies  
Hermann